T8 LED Tubes are designed as the energy-saving replacement for traditional fluorescent tube. With standard G13 base, they are compatible with any traditional T8 sockets and can work from AC100V to AC 240V.

It adopts high intensity SMD as its light source, which makes it produce equivalent light intensity of 40 watts fluorescent lights at only 18 watts consumption (1200mm). With unique heat treatment technology and aluminum housing, the tube can play its performance stably and has a life span of more than 50,000 hours.

T8 LED Tubes acts without flicking, and eco-friendly without mercury.T8 LED Tubes is CE certificated and ROHS compliant.

They are available in 600mm and 1200mm compatible with standard lighting fixtures in different dimensions.

T8 LED Tubes is just your ideal choice for replacing conventional fluorescent in general lighting, task lighting, display lighting and back lighting.

Features & Benefits

High lumen maintenance with high quality LED.

High efficacy, up to 80% energy saving compared with fluorescent tube.

Easy installation, compatible with standard T8 sockets.

Long life span of more than 50,000 hours.

Eco-friendly, no mercury, infrared or UV rays.

Available in 600mm,1200mm and 1500mm.

Application

General lighting for homes, offices, hotels, malls, hospitals, parking lots etc.

Task lighting for cabinets, display counter, cupboards etc.

Display lighting in stores and shops;

Installation Guide

Note:

There are two kinds of ballasts for conventional fluorescent lights, inductive ballast and electronic ballast. The installation step for fixture with inductive ballast is different from that with electronic ballast.  

Fixture with inductive ballast and starter

Step1, Turn off the power and remove the conventional fluorescent tube from the light fixture.

Step 2, Take out the starter and inductive ballast from the fixture.

Step 3, Reconnect the wires referring to the diagram above.

Step 4, Install the LED tube into the fixture and switch the main power on.

Fixture with electronic ballast

Step1, Turn off the power and remove the conventional fluorescent tube from the light fixture.

Step 2, Take out the electronic ballast from the fixture.

Step 3, Reconnect the wires referring to the diagram above.

Step 4, Install the LED tube into the fixture and switch the main power on.